Merchandise Description
Created in China, Sold to the globe
Flexible, Straightforward, Reasonably priced, Potent, Dependable
1LYQ Collection Driving Disc Plough solution description
1LYQ Sequence Driving Disc Plough merchandise description
one. 1LYQ Series Driving Disc Plough suited for plowing paddy subject and dry cultivated subject, specially appropriate for plowing paddy area, higher-generate environmentally friendly fertilizer fields and plowing submitted with rice or wheat stubble. This plow is with excellent operating functionality, very good chopping soil performance. it can meet the complex demands of agricultural production, and it is effortless to work and modify.
two. 1LYQ Series Driving Disc Plough relevant for intricate land, such as weedy land, weighty soil, farmland with bricks and stones, and many others. no tied with grass, not obstruction, can minimize off stem of crop and overcome bricks and stones, with high effectiveness, good quality perform, effortless to change, basic to use,sturdy, and so on.
1LYQ Sequence Driving Disc Plough product marketing factors
1. New type compact tractor disc plow has the attribute of not Winding grass , not block and no hip constructing- up.
2. The mounted disc plough is straightforward to lower off stems and roots .
3. Much less doing work resistance .
4. It is a mounted disc plough for 4-wheel tractor.
5. It has compact structure and appropriate for functioning on all different land.
six. With the operating performance of the machine, following cultivation, the land surface area is leveling, the soil clods well crushed and turned above and the furrows is small.
seven. The functioning pace is 8-ten kilometers per hour.
eight. Disc plough can be mounted to fifteen-90 HP tractors with the procedure is sleek with out any problems.
9. They are also ideal for operating on terraced fields and tiny piece of farming land.
ten. have the traits of short idle distance of journey on the edge of fields, high efficiency, lower oil intake and so forth(etcetera).
1LYQ Sequence Driving Disc Plough solution parameters
| Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
| General dimension(mm) | 1325*2571*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2571*1050 | 1440*2265*1050 | 1555*2465*1050 |
| amount of disc (pec) | three | four | 5 | six | seven | eight | 9 |
| the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Doing work width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
| operating depth(mm) | 200-240 | two hundred-240 | 200-240 | 200-240 | 200-240 | two hundred-240 | two hundred-240 |
| Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
| Rotating speed of cutter shaft(r/min) | ninety-one hundred twenty | ninety-a hundred and twenty | 90-one hundred twenty | 90-one hundred twenty | ninety-one hundred twenty | ninety-one hundred twenty | ninety-120 |
| Matched electrical power(hp) | fifteen-18 | 18-22 | 25-40 | forty-50 | 50-60 | 60-80 | 80-ninety |
| weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
| Linkage | Three-position suspension | Three-level suspension | |||||
1LYQ Collection Driving Disc Plough photographs demonstrate
1LYT collection disc plough merchandise parameters
| Model | 1LYT-220 | 1LYT-320 | 1LYT-420 | 1LYT-325 | 1LYT-425 | 1LYT-525 | 1LYT-625 | 1LYT-230 | 1LYT-330 | 1LYT-430 |
| Working Width (mm) | four hundred | 600 | 800 | 750 | one thousand | 1250 | 1500 | 600 | 900 | 1200 |
| Operating Depth (mm) | 200 | 250-300 | 300 | |||||||
| Qty. of Disc (computer) | two | three | four | 3 | four | five | six | 2 | 3 | 4 |
| Dia. of Disc (mm) | 510*4 | 510*4 | 510*4 | 660*six | 710*six | |||||
| Linkage | Three-level suspension | Three-level suspension | Three details suspension | |||||||
| Matched Electricity (hp) | 21-thirty | 25-35 | thirty-forty | fifty-sixty five | 65-eighty five | 80-100 | a hundred-120 | fifty five-70 | 60-eighty | eighty-100 |
1L sequence furrow plough item parameters
| Design | 1L-220 | 1L-320 | 1L-420 | 1L-520 | 1L-225 | 1L-325 | 1L-425 | 1L-525 | 1L-625 |
| Bodyweight(kg) | 60 | a hundred | 155 | 180 | one hundred twenty five | 160 | 210 | 260 | three hundred |
| Matched electrical power(hp) | twelve-twenty | 25-30 | 35-forty | forty five-50 | 28-thirty | 30-45 | 40-fifty | 60-65 | 70-75 |
| Linkage | Three-point suspension | Three-level suspension | |||||||
| Functioning width(mm) | 400 | 600 | 800 | a thousand | five hundred | 750 | 1000 | 1250 | 1600 |
| Working depth(mm) | 180-250 | 200-250 | |||||||
| No. of plowbody(pcs) | two | 3 | 4 | 5 | 2 | three | four | five | 6 |
| Product | 1L-330 | 1L-430 | 1L-530 | 1L-335 | 1L-435 | 1L-535 | 1L-635 |
| Bodyweight(kg) | 240 | 310 | 380 | 280 | 320 | 370 | 420 |
| Matched energy(hp) | 50-55 | 60-seventy five | 80-100 | fifty-75 | eighty-100 | a hundred | a hundred and twenty |
| Linkage | Three-position suspension | Three-position suspension | |||||
| Functioning width(mm) | 900 | 1200 | 1500 | 1050 | 1400 | 1700 | 2100 |
| Doing work depth(mm) | 260-three hundred | 285-350 | |||||
| No. of plowbody(pcs) | three | four | five | three | four | five | 6 |
1LYQ Sequence Driving Disc Plough solution parameters
| Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
| General dimension(mm) | 1325*2571*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2571*1050 | 1440*2265*1050 | 1555*2465*1050 |
| variety of disc (pec) | 3 | four | five | six | 7 | 8 | 9 |
| the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Doing work width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
| functioning depth(mm) | 200-240 | 200-240 | 200-240 | two hundred-240 | 200-240 | 200-240 | 200-240 |
| Rotating pace of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
| Rotating velocity of cutter shaft(r/min) | ninety-one hundred twenty | 90-120 | 90-a hundred and twenty | ninety-one hundred twenty | ninety-120 | 90-a hundred and twenty | 90-a hundred and twenty |
| Matched electricity(hp) | 15-18 | eighteen-22 | 25-forty | 40-50 | 50-60 | 60-eighty | eighty-ninety |
| general weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
| Linkage | Three-stage suspension | Three-stage suspension | |||||
1LY Sequence Disc Plough item parameters
| Model | 1LY-2 | 1LY-three | 1LY-four | 1LY-5 |
| Operating width(mm) | 600 | 900 | 1200 | 1500 |
| Operating depth(mm) | 250~three hundred | 250~301 | 250~302 | 250~303 |
| Q’ty of disc | 2 | 3 | four | 5 |
| Complete bodyweight(kg) | 350 | 400 | 470 | 560 |
| Matched energy(hp) | forty | sixty | eighty | one hundred twenty |
| Linkage | 3-stage suspension | 3-stage suspension | A few-stage suspension | Three-point suspension |
1LYX Collection Disc Plough solution parameters
| Product | 1LYX-230 | 1LYX-330 | 1LYX-430 | 1LYX-530 |
| Overall dimension (mm) | 1650x1150x1200 | 2300x1400x1200 | 2950x1730x1200 | 3687x2163x1200 |
| Weight (kg) | 320 | 450 | 540 | 600 |
| Functioning width (mm) | 600 | 900 | 1200 | 1500 |
| Working depth (mm) | 250 | 250 | 250 | 250 |
| Nos of disc blade | two | three | 4 | 5 |
| Dia of disc | 710mm”X6 “ | 710mm”X6 “ | 710mm”X6 “ | 710mm”X6 “ |
| Matched electricity (hp) | 40-fifty | 70 | ninety-a hundred | a hundred and twenty |
| Efficiency (ha/h) | .3 | .45 | .six | .75 |
| Linkage | 3-level suspension | A few-stage suspension | Three-position suspension | Three-level suspension |
1LF collection Hydraulic Tilting Plough solution parameters
| Model | 1LF-330 | 1LF-430 | 1LF-530 |
| Max .Functioning width(mm) | 900 | 1200 | 1500 |
| operating depth | a hundred and sixty-250 | 160-250 | a hundred and sixty-250 |
| Linkage | Three-point suspension II kind | Three-stage suspension II kind | Three-position suspension II variety |
| Work efficiency(Ha/h) | five.5-7.five | seven.5-nine | 10-12.5 |
| Matched energy(hp) | 50-65 | sixty five-ninety | one hundred-120 |
| No of disc(personal computer) | six | eight | 10 |
| Fat(Kg) | 550 | 750 | 980 |
1LF series hydraulic grille flip plough item parameters
| Modle | 1LF-345 | 1LF-445 | 1LF-545 |
| Number of bottoms | 6 | 8 | ten |
| Working width(mm) | 1350 | 1800 | 2250 |
| Working depth(mm) | 350-four hundred | 350-400 | 350-400 |
| bodyweight(kg) | a thousand | 1200 | 1400 |
| Matched power(hp) | a hundred and twenty-a hundred and fifty | 150-one hundred eighty | 180-240 |
| Linkage | (Standard three-point mounted) | (Standard three-point mounted) | (Standard three-point mounted) |
Complete collection of share plow, turnover plow, disc plow photo mix exhibit
Entire variety of disc harrow picture show
ES sequence disc blade Solution parameters
| Diameter | Thickness | Weight Simple | Weight Notched | ||||
| MM | INCH | MM | INCH | KG | LBS | KG | LBS |
| 300mm | twelve” | 3 | one/8″ | one.six | 3.5 | 1.1 | two.four |
| 330mm | thirteen” | 3 | 1/8″ | 1.8 | four | 1.two | two.6 |
| 360mm | fourteen” | 3 | one/8″ | 2.3 | four.nine | one.9 | four.1 |
| 410mm | 16″ | 3 | one/8″ | three.2 | 7 | two.7 | five.nine |
| 460mm | 18″ | 3 | 1/8″ | four.3 | nine.five | 3.8 | eight.four |
| 460mm | eighteen” | three.5 | 1/7″ | 4.six | ten.two | 4.one | 9 |
| 510mm | 20″ | 3.five | one/7″ | 5.eight | twelve.7 | 5.6 | 11.5 |
| 510mm | twenty” | 4 | 2/13″ | six.five | fourteen.4 | five.eight | 12.7 |
| 560mm | 22″ | four | 2/13″ | eight.one | 18 | seven.five | sixteen.five |
| 560mm | 22″ | four.five | two/11″ | nine | twenty | 8.five | 18.7 |
| 560mm | 22″ | 5 | one/5″ | 9.five | 21.6 | nine | 19.8 |
| 560mm | 22″ | six | fifteen/64″ | twelve | 26.5 | eleven | 24.two |
| 610mm | 24″ | five | one/5″ | 11.three | twenty five | 10.five | 23.1 |
| 610mm | 24″ | six | 15/sixty four” | fourteen.two | 31.five | thirteen | 28.six |
| 660mm | 26″ | five | one/5″ | 14.one | 31 | thirteen | 28.six |
| 660mm | 26″ | six | 15/sixty four” | seventeen | 37.five | fifteen.eight | 34.eight |
| 660mm | 26″ | seven | 9/32″ | 20 | forty three.five | 18.5 | 40.7 |
| 660mm | 26″ | 8 | 5/sixteen” | 23 | fifty one | 21 | 46 |
| 710mm | 28″ | 6 | 15/64″ | 20 | forty four | 18.five | 40.seven |
| 710mm | 28″ | seven | 9/32″ | 23 | fifty.six | 21.5 | 46 |
| 710mm | 28″ | 8 | five/sixteen” | 26 | fifty seven.2 | 24 | fifty two.one |
| 760mm | thirty” | eight | 5/16″ | 29 | sixty four | 28 | sixty one.5 |
| 760mm | thirty” | 10 | 3/8″ | 35 | 77 | 33.five | 73.7 |
| 810mm | 32″ | 8 | 5/sixteen” | 35 | seventy seven | 33 | seventy five |
| 810mm | 32″ | ten | 3/8″ | forty three | 95 | forty | sixty eight |
| 910mm | 36″ | 12 | 1/2″ | sixty eight | a hundred and fifty | sixty | 132 |
| 960mm | 38″ | 12 | one/2″ | 77 | 170 | 70 | 154 |
| 1016mm | forty” | twelve | one/2″ | eighty two | a hundred and eighty | 77 | 169.four |
| 1116mm | 44″ | twelve | one/2″ | 89 | 196 | eighty four | 184.8 |
Disc blade image show
Entire assortment of tractor merchandise exhibit
Our business produces other agricultural machinery show
Manufacturing unit introduction
ZheJiang Euro Star Equipment Manufacture Co., Ltd. is a skilled Equipment and tools manufacturer integrating R&D, layout, producing, income and support. The company’s products go over agricultural machinery, development equipment, laser tools, generator sets and so on.
As a professional machinery equipment company in China, the company has committed by itself to supply all-spherical answer to world-wide contemporary agricultural mechanization. The business has integrating high-conclude merchandise and systems sources around the entire world by upgrading of systems, top quality and support and bringing forth new suggestions to produce innovative products as so to boost track record and market place share of CZPT in the entire world action by step.
The business has passed the ISO9001:2015 global top quality administration technique certification, and based mostly on this, masking item advancement, component purchase, production and production, high quality inspection, sales and after-marketplace provider, so as to handle the merchandise good quality on the total.
Supported by complete quality assurance system and produced sales and support network, the company has manufactured leaping boost of product sales in domestic marketplace by way of trustful good quality and outstanding services mode. Besides, Most of the company’s items have passed the European CE certification.items are exported to Europe, The united states, Latin America, the Center East, Asia-Pacific, CIS, Africa and more than 80 countries and areas.Our merchandise have been acknowledged by all overseas buyers, and we are satisfied to create long-term cooperative interactions with new close friends.
Xihu (West Lake) Dis.g at fulfilling the customers, we have labored challenging to provide exceptional and swift service to customers each at property and abroad by way of superior technologies, created items and comprehensive network so as to improve the client satisfaction.
In long term, the firm will adhere to the theory of sound company procedure, steady innovation and opening up and cooperation to create a lot more higher-end equipment and products based mostly on present types for the modern society and for agriculture and contribute to world-wide modern day agriculture creation.
Agricultural processing and generation workshop
Services
A single-stop company chain services support system
With an international support staff with prosperous knowledge and exceptional ability, firm is committed to create a full support ensure program, which is expert, quick, productive and extensive. Each customer in overseas would get a total-approach provider guarantee including pre-income, on sale and soon after income through the way of marketplaces, spare parts, coaching provider and complex help.
1) Marketplace Services
Service Mode : Stationary Stage + Circuit Service
Lengthy-phrase Stationary Point Services
Quick-time period Circuit Technology Support Support
Services Process: Common, Substantial Productive, Seasonable
Service Image: Professional, Unified
two) Spare Components Provider
Spare Areas Assure Actions: Vendor+ Spare Component Warehouse
100% original spare components assure great good quality
Bar-code method adopted in the whole process assures accuracy and promptness
Specialist and precise bundle and logistics guarantee safe and relieved transportation.
3) Training Services
Characteristic Instruction Mode: invite the professionals of sellers to manufacturing unit for training, send out engineers to sellers for education
A total range of education equipment, multi-language training supplies, vivid education video clip
Expert coaching instructors with prosperous service encounter and good interaction functionality
A single-to-1 unique assignment coaching
Distant on the web network instruction
4) Technical Assist
The complete procedure Technological innovation help addresses on sale and right after-sale service.
Terms of the deal:
1). Supply: twenty times for regular orders
two). Price tag: We have cost on basis FOB HangZhou and CIF your vacation spot for your decision
3). Payment phrases for 1st get:
—–T/T thirty% deposit and stability prior to shipment
—–one hundred% L/C at sight
4). Payment for long terms cooperation of great reputation companions, we have SINOSURE insurance policy for our VIP clients, and we can offer credit rating support following we common with every other. We are searching for partnership for extended-time period business
FAQ:
Why decide on us?
1). The high quality is confirmed thanks to robust technical assist ,initial course ingredient ,innovative manufacturing line and stringent top quality manage method.
two). Be major Professional in worldwide marketplace for much more than 5 a long time, China Popular Export Brand name suggested by CCCME (China Chamber of Commerce for Import and Export of Equipment and Digital Items)
three). One particular-cease service with a huge spare elements warehouse and expert service crew .No matter the place you are, you are guaranteed of Eurostar’ s heat reception, reliable and successful skilled companies and persistent care.
How Shipment?
We have labored with many entire world well-known transport carriers and can prepare shipment to any country in the globe, it can save your time and income. We can give airfreight and CZPT provider.
Speak to us
Mr. Duke Zhang
ZheJiang Euro Star Equipment Manufacture Co., Ltd.
Incorporate: 198 HangZhou Street, Xihu (West Lake) Dis. District, HangZhou Metropolis, ZheJiang Province,P.R.C.
Net:eurostartractor
EUROSTAR Clients ALL In excess of THE World
|
US $380-960 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | 1 Year |
|---|---|
| Type: | Disc Plough |
| Application Field: | Agriculture, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Tractor |
| Operation: | Arable Machinery, Continuous Running Operation |
###
| Customization: |
Available
|
|---|
###
| Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
| Overall dimension(mm) | 1325*2025*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2025*1050 | 1440*2265*1050 | 1555*2465*1050 |
| number of disc (pec) | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Working width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
| working depth(mm) | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 |
| Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
| Rotating speed of cutter shaft(r/min) | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 |
| Matched power(hp) | 15-18 | 18-22 | 25-40 | 40-50 | 50-60 | 60-80 | 80-90 |
| weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
| Linkage | Three-point suspension | Three-point suspension | |||||
###
| Model | 1LYT-220 | 1LYT-320 | 1LYT-420 | 1LYT-325 | 1LYT-425 | 1LYT-525 | 1LYT-625 | 1LYT-230 | 1LYT-330 | 1LYT-430 |
| Working Width (mm) | 400 | 600 | 800 | 750 | 1000 | 1250 | 1500 | 600 | 900 | 1200 |
| Working Depth (mm) | 200 | 250-300 | 300 | |||||||
| Qty. of Disc (pc) | 2 | 3 | 4 | 3 | 4 | 5 | 6 | 2 | 3 | 4 |
| Dia. of Disc (mm) | 510*4 | 510*4 | 510*4 | 660*6 | 710*6 | |||||
| Linkage | Three-point suspension | Three-point suspension | Three points suspension | |||||||
| Matched Power (hp) | 21-30 | 25-35 | 30-40 | 50-65 | 65-85 | 80-100 | 100-120 | 55-70 | 60-80 | 80-100 |
###
| Model | 1L-220 | 1L-320 | 1L-420 | 1L-520 | 1L-225 | 1L-325 | 1L-425 | 1L-525 | 1L-625 |
| Weight(kg) | 60 | 100 | 155 | 180 | 125 | 160 | 210 | 260 | 300 |
| Matched power(hp) | 12-20 | 25-30 | 35-40 | 45-50 | 28-30 | 30-45 | 40-50 | 60-65 | 70-75 |
| Linkage | Three-point suspension | Three-point suspension | |||||||
| Working width(mm) | 400 | 600 | 800 | 1000 | 500 | 750 | 1000 | 1250 | 1600 |
| Working depth(mm) | 180-250 | 200-250 | |||||||
| No. of plowbody(pcs) | 2 | 3 | 4 | 5 | 2 | 3 | 4 | 5 | 6 |
###
| Model | 1L-330 | 1L-430 | 1L-530 | 1L-335 | 1L-435 | 1L-535 | 1L-635 |
| Weight(kg) | 240 | 310 | 380 | 280 | 320 | 370 | 420 |
| Matched power(hp) | 50-55 | 60-75 | 80-100 | 50-75 | 80-100 | 100 | 120 |
| Linkage | Three-point suspension | Three-point suspension | |||||
| Working width(mm) | 900 | 1200 | 1500 | 1050 | 1400 | 1700 | 2100 |
| Working depth(mm) | 260-300 | 285-350 | |||||
| No. of plowbody(pcs) | 3 | 4 | 5 | 3 | 4 | 5 | 6 |
###
| Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
| Overall dimension(mm) | 1325*2025*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2025*1050 | 1440*2265*1050 | 1555*2465*1050 |
| number of disc (pec) | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Working width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
| working depth(mm) | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 |
| Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
| Rotating speed of cutter shaft(r/min) | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 |
| Matched power(hp) | 15-18 | 18-22 | 25-40 | 40-50 | 50-60 | 60-80 | 80-90 |
| overall weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
| Linkage | Three-point suspension | Three-point suspension | |||||
###
| Model | 1LY-2 | 1LY-3 | 1LY-4 | 1LY-5 |
| Working width(mm) | 600 | 900 | 1200 | 1500 |
| Working depth(mm) | 250~300 | 250~301 | 250~302 | 250~303 |
| Q’ty of disc | 2 | 3 | 4 | 5 |
| Total weight(kg) | 350 | 400 | 470 | 560 |
| Matched power(hp) | 40 | 60 | 80 | 120 |
| Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
###
| Model | 1LYX-230 | 1LYX-330 | 1LYX-430 | 1LYX-530 |
| Overall dimension (mm) | 1650x1150x1200 | 2300x1400x1200 | 2950x1730x1200 | 3687x2163x1200 |
| Weight (kg) | 320 | 450 | 540 | 600 |
| Working width (mm) | 600 | 900 | 1200 | 1500 |
| Working depth (mm) | 250 | 250 | 250 | 250 |
| Nos of disc blade | 2 | 3 | 4 | 5 |
| Dia of disc | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " |
| Matched power (hp) | 40-50 | 70 | 90-100 | 120 |
| Productivity (ha/h) | 0.3 | 0.45 | 0.6 | 0.75 |
| Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
###
| Model | 1LF-330 | 1LF-430 | 1LF-530 |
| Max .Working width(mm) | 900 | 1200 | 1500 |
| working depth | 160-250 | 160-250 | 160-250 |
| Linkage | Three-point suspension II type | Three-point suspension II type | Three-point suspension II type |
| Work efficiency(Ha/h) | 5.5-7.5 | 7.5-9 | 10-12.5 |
| Matched power(hp) | 50-65 | 65-90 | 100-120 |
| No of disc(pc) | 6 | 8 | 10 |
| Weight(Kg) | 550 | 750 | 980 |
###
| Modle | 1LF-345 | 1LF-445 | 1LF-545 |
| Number of bottoms | 6 | 8 | 10 |
| Working width(mm) | 1350 | 1800 | 2250 |
| Working depth(mm) | 350-400 | 350-400 | 350-400 |
| weight(kg) | 1000 | 1200 | 1400 |
| Matched power(hp) | 120-150 | 150-180 | 180-240 |
| Linkage | (Standard three-point mounted) | (Standard three-point mounted) | (Standard three-point mounted) |
###
| Diameter | Thickness | Weight Plain | Weight Notched | ||||
| MM | INCH | MM | INCH | KG | LBS | KG | LBS |
| 300mm | 12" | 3 | 1/8" | 1.6 | 3.5 | 1.1 | 2.4 |
| 330mm | 13" | 3 | 1/8" | 1.8 | 4 | 1.2 | 2.6 |
| 360mm | 14" | 3 | 1/8" | 2.3 | 4.9 | 1.9 | 4.1 |
| 410mm | 16" | 3 | 1/8" | 3.2 | 7 | 2.7 | 5.9 |
| 460mm | 18" | 3 | 1/8" | 4.3 | 9.5 | 3.8 | 8.4 |
| 460mm | 18" | 3.5 | 1/7" | 4.6 | 10.2 | 4.1 | 9 |
| 510mm | 20" | 3.5 | 1/7" | 5.8 | 12.7 | 5.6 | 11.5 |
| 510mm | 20" | 4 | 2/13" | 6.5 | 14.4 | 5.8 | 12.7 |
| 560mm | 22" | 4 | 2/13" | 8.1 | 18 | 7.5 | 16.5 |
| 560mm | 22" | 4.5 | 2/11" | 9 | 20 | 8.5 | 18.7 |
| 560mm | 22" | 5 | 1/5" | 9.5 | 21.6 | 9 | 19.8 |
| 560mm | 22" | 6 | 15/64" | 12 | 26.5 | 11 | 24.2 |
| 610mm | 24" | 5 | 1/5" | 11.3 | 25 | 10.5 | 23.1 |
| 610mm | 24" | 6 | 15/64" | 14.2 | 31.5 | 13 | 28.6 |
| 660mm | 26" | 5 | 1/5" | 14.1 | 31 | 13 | 28.6 |
| 660mm | 26" | 6 | 15/64" | 17 | 37.5 | 15.8 | 34.8 |
| 660mm | 26" | 7 | 9/32" | 20 | 43.5 | 18.5 | 40.7 |
| 660mm | 26" | 8 | 5/16" | 23 | 51 | 21 | 46 |
| 710mm | 28" | 6 | 15/64" | 20 | 44 | 18.5 | 40.7 |
| 710mm | 28" | 7 | 9/32" | 23 | 50.6 | 21.5 | 46 |
| 710mm | 28" | 8 | 5/16" | 26 | 57.2 | 24 | 52.1 |
| 760mm | 30" | 8 | 5/16" | 29 | 64 | 28 | 61.5 |
| 760mm | 30" | 10 | 3/8" | 35 | 77 | 33.5 | 73.7 |
| 810mm | 32" | 8 | 5/16" | 35 | 77 | 33 | 75 |
| 810mm | 32" | 10 | 3/8" | 43 | 95 | 40 | 68 |
| 910mm | 36" | 12 | 1/2" | 68 | 150 | 60 | 132 |
| 960mm | 38" | 12 | 1/2" | 77 | 170 | 70 | 154 |
| 1016mm | 40" | 12 | 1/2" | 82 | 180 | 77 | 169.4 |
| 1116mm | 44" | 12 | 1/2" | 89 | 196 | 84 | 184.8 |
|
US $380-960 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | 1 Year |
|---|---|
| Type: | Disc Plough |
| Application Field: | Agriculture, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Tractor |
| Operation: | Arable Machinery, Continuous Running Operation |
###
| Customization: |
Available
|
|---|
###
| Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
| Overall dimension(mm) | 1325*2025*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2025*1050 | 1440*2265*1050 | 1555*2465*1050 |
| number of disc (pec) | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Working width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
| working depth(mm) | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 |
| Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
| Rotating speed of cutter shaft(r/min) | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 |
| Matched power(hp) | 15-18 | 18-22 | 25-40 | 40-50 | 50-60 | 60-80 | 80-90 |
| weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
| Linkage | Three-point suspension | Three-point suspension | |||||
###
| Model | 1LYT-220 | 1LYT-320 | 1LYT-420 | 1LYT-325 | 1LYT-425 | 1LYT-525 | 1LYT-625 | 1LYT-230 | 1LYT-330 | 1LYT-430 |
| Working Width (mm) | 400 | 600 | 800 | 750 | 1000 | 1250 | 1500 | 600 | 900 | 1200 |
| Working Depth (mm) | 200 | 250-300 | 300 | |||||||
| Qty. of Disc (pc) | 2 | 3 | 4 | 3 | 4 | 5 | 6 | 2 | 3 | 4 |
| Dia. of Disc (mm) | 510*4 | 510*4 | 510*4 | 660*6 | 710*6 | |||||
| Linkage | Three-point suspension | Three-point suspension | Three points suspension | |||||||
| Matched Power (hp) | 21-30 | 25-35 | 30-40 | 50-65 | 65-85 | 80-100 | 100-120 | 55-70 | 60-80 | 80-100 |
###
| Model | 1L-220 | 1L-320 | 1L-420 | 1L-520 | 1L-225 | 1L-325 | 1L-425 | 1L-525 | 1L-625 |
| Weight(kg) | 60 | 100 | 155 | 180 | 125 | 160 | 210 | 260 | 300 |
| Matched power(hp) | 12-20 | 25-30 | 35-40 | 45-50 | 28-30 | 30-45 | 40-50 | 60-65 | 70-75 |
| Linkage | Three-point suspension | Three-point suspension | |||||||
| Working width(mm) | 400 | 600 | 800 | 1000 | 500 | 750 | 1000 | 1250 | 1600 |
| Working depth(mm) | 180-250 | 200-250 | |||||||
| No. of plowbody(pcs) | 2 | 3 | 4 | 5 | 2 | 3 | 4 | 5 | 6 |
###
| Model | 1L-330 | 1L-430 | 1L-530 | 1L-335 | 1L-435 | 1L-535 | 1L-635 |
| Weight(kg) | 240 | 310 | 380 | 280 | 320 | 370 | 420 |
| Matched power(hp) | 50-55 | 60-75 | 80-100 | 50-75 | 80-100 | 100 | 120 |
| Linkage | Three-point suspension | Three-point suspension | |||||
| Working width(mm) | 900 | 1200 | 1500 | 1050 | 1400 | 1700 | 2100 |
| Working depth(mm) | 260-300 | 285-350 | |||||
| No. of plowbody(pcs) | 3 | 4 | 5 | 3 | 4 | 5 | 6 |
###
| Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
| Overall dimension(mm) | 1325*2025*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2025*1050 | 1440*2265*1050 | 1555*2465*1050 |
| number of disc (pec) | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Working width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
| working depth(mm) | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 |
| Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
| Rotating speed of cutter shaft(r/min) | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 |
| Matched power(hp) | 15-18 | 18-22 | 25-40 | 40-50 | 50-60 | 60-80 | 80-90 |
| overall weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
| Linkage | Three-point suspension | Three-point suspension | |||||
###
| Model | 1LY-2 | 1LY-3 | 1LY-4 | 1LY-5 |
| Working width(mm) | 600 | 900 | 1200 | 1500 |
| Working depth(mm) | 250~300 | 250~301 | 250~302 | 250~303 |
| Q’ty of disc | 2 | 3 | 4 | 5 |
| Total weight(kg) | 350 | 400 | 470 | 560 |
| Matched power(hp) | 40 | 60 | 80 | 120 |
| Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
###
| Model | 1LYX-230 | 1LYX-330 | 1LYX-430 | 1LYX-530 |
| Overall dimension (mm) | 1650x1150x1200 | 2300x1400x1200 | 2950x1730x1200 | 3687x2163x1200 |
| Weight (kg) | 320 | 450 | 540 | 600 |
| Working width (mm) | 600 | 900 | 1200 | 1500 |
| Working depth (mm) | 250 | 250 | 250 | 250 |
| Nos of disc blade | 2 | 3 | 4 | 5 |
| Dia of disc | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " |
| Matched power (hp) | 40-50 | 70 | 90-100 | 120 |
| Productivity (ha/h) | 0.3 | 0.45 | 0.6 | 0.75 |
| Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
###
| Model | 1LF-330 | 1LF-430 | 1LF-530 |
| Max .Working width(mm) | 900 | 1200 | 1500 |
| working depth | 160-250 | 160-250 | 160-250 |
| Linkage | Three-point suspension II type | Three-point suspension II type | Three-point suspension II type |
| Work efficiency(Ha/h) | 5.5-7.5 | 7.5-9 | 10-12.5 |
| Matched power(hp) | 50-65 | 65-90 | 100-120 |
| No of disc(pc) | 6 | 8 | 10 |
| Weight(Kg) | 550 | 750 | 980 |
###
| Modle | 1LF-345 | 1LF-445 | 1LF-545 |
| Number of bottoms | 6 | 8 | 10 |
| Working width(mm) | 1350 | 1800 | 2250 |
| Working depth(mm) | 350-400 | 350-400 | 350-400 |
| weight(kg) | 1000 | 1200 | 1400 |
| Matched power(hp) | 120-150 | 150-180 | 180-240 |
| Linkage | (Standard three-point mounted) | (Standard three-point mounted) | (Standard three-point mounted) |
###
| Diameter | Thickness | Weight Plain | Weight Notched | ||||
| MM | INCH | MM | INCH | KG | LBS | KG | LBS |
| 300mm | 12" | 3 | 1/8" | 1.6 | 3.5 | 1.1 | 2.4 |
| 330mm | 13" | 3 | 1/8" | 1.8 | 4 | 1.2 | 2.6 |
| 360mm | 14" | 3 | 1/8" | 2.3 | 4.9 | 1.9 | 4.1 |
| 410mm | 16" | 3 | 1/8" | 3.2 | 7 | 2.7 | 5.9 |
| 460mm | 18" | 3 | 1/8" | 4.3 | 9.5 | 3.8 | 8.4 |
| 460mm | 18" | 3.5 | 1/7" | 4.6 | 10.2 | 4.1 | 9 |
| 510mm | 20" | 3.5 | 1/7" | 5.8 | 12.7 | 5.6 | 11.5 |
| 510mm | 20" | 4 | 2/13" | 6.5 | 14.4 | 5.8 | 12.7 |
| 560mm | 22" | 4 | 2/13" | 8.1 | 18 | 7.5 | 16.5 |
| 560mm | 22" | 4.5 | 2/11" | 9 | 20 | 8.5 | 18.7 |
| 560mm | 22" | 5 | 1/5" | 9.5 | 21.6 | 9 | 19.8 |
| 560mm | 22" | 6 | 15/64" | 12 | 26.5 | 11 | 24.2 |
| 610mm | 24" | 5 | 1/5" | 11.3 | 25 | 10.5 | 23.1 |
| 610mm | 24" | 6 | 15/64" | 14.2 | 31.5 | 13 | 28.6 |
| 660mm | 26" | 5 | 1/5" | 14.1 | 31 | 13 | 28.6 |
| 660mm | 26" | 6 | 15/64" | 17 | 37.5 | 15.8 | 34.8 |
| 660mm | 26" | 7 | 9/32" | 20 | 43.5 | 18.5 | 40.7 |
| 660mm | 26" | 8 | 5/16" | 23 | 51 | 21 | 46 |
| 710mm | 28" | 6 | 15/64" | 20 | 44 | 18.5 | 40.7 |
| 710mm | 28" | 7 | 9/32" | 23 | 50.6 | 21.5 | 46 |
| 710mm | 28" | 8 | 5/16" | 26 | 57.2 | 24 | 52.1 |
| 760mm | 30" | 8 | 5/16" | 29 | 64 | 28 | 61.5 |
| 760mm | 30" | 10 | 3/8" | 35 | 77 | 33.5 | 73.7 |
| 810mm | 32" | 8 | 5/16" | 35 | 77 | 33 | 75 |
| 810mm | 32" | 10 | 3/8" | 43 | 95 | 40 | 68 |
| 910mm | 36" | 12 | 1/2" | 68 | 150 | 60 | 132 |
| 960mm | 38" | 12 | 1/2" | 77 | 170 | 70 | 154 |
| 1016mm | 40" | 12 | 1/2" | 82 | 180 | 77 | 169.4 |
| 1116mm | 44" | 12 | 1/2" | 89 | 196 | 84 | 184.8 |
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by czh 2023-01-07