Product Description
China factory supply Europe CE certificate DQ554 55HP 4WD Agricultural wheel farm garden tractor with durable wide industrial tires
Tractor Main Features and Advantages:
1. Equipped famous brand engine showing advanced capacity, low fuel consumption and high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3. Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly, reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed: 540/1000, 760/1000, 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Full series light, ROPS, Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.
Tractor Main specificaiton and Technical parameters:
| Tractor Model | DQ554 |
| Drive type | 4X4 |
| Engine | |
| Type of engine | Xinchai 4-Cylinder Diesel engine |
| Capacity of fuel tank(L) | 38L |
| Engine power at rated speed | 40.5kw / 55HP |
| Rated speed (r/min) | 2400 |
| Transmission | |
| Clutch | Dry, dual-stage type |
| PTO speed | 540/1000rpm or 540/760rpm |
| Gear shift | 8F+4R/8F+8R/12F+12R (Optional) |
| Hydraulic system | |
| Hydraulic output valve | 2-Way (optional) |
| Three point linkage | |
| Category of 3-point link | Rear, category II |
| Lifting force (at point of 610mm)KN | 12 |
| Technical parameter | |
| Overall size (L x W x H)mm | 3513X1750X2130 |
| Wheel base (mm) | 2040 |
| The smallest clearance (mm) | 325 |
| Front tire | 8.3-20 |
| Rear tire | 12.4-28/14.9-24 (optional) |
| Optional Configurations | |
| ROPS, Canopy(Sunshade), Cabin with Fan/Heater/Air-condition, 2-Group Hydraulic output valve, Front ballast, Rear ballast, Air brake, 8F+8R/12F+12R Shuttle gearshift, Paddy tire, 14.9-24 big rear tire, Swing draw bar. | |
DQ554 55HP 4WD Tractor details:
Tractor is fitted wide industrial tyres making it ideal for working on beaches and other softer surfaces.
DQ554 55HP 4WD Tractor have various Configurations, Attachments, Implements for choose
Advance Manufacutring Line:
Strictly Inspecting and Full Testing for ensuring high quality product:
Tractor Packing, Loading container and Delivering goods to Customers:
Perfect after-sale service for both Distributors and Private customers:
Best price will be quoted for you as soon as receive your Requirement!
| After-sales Service: | Factor Directly Supply |
|---|---|
| Warranty: | 2 Years |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC, Pvoc, Coc, Oecd |
| Drive Wheel: | 4WD |
| Samples: |
US$ 8300/set
1 set(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO Shaft
There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.
Transmission PTO
If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.
Economy PTO
The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.
Two-stage clutch on pto shaft
If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.
Types of independent pto shafts
Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
editor by CX 2023-06-05
China Custom 110HP 4*4 4WD Farm/Construction/Agricultural/ Tractor pto shaft bush hog
Product Description
110HP 4*4 4WD Farm/Construction/Agricultural/Medium Tractors
1.YTO/Yuchai Engine
2.Drive Wheel:4WD(4*4)
3.Four-stroke engines with high torque reserve.
4.Adjustable front and rear tracks.
5.Full hydraulic steering.
Technical Parameters
| Model No. | TL1104 | |
| Type | 4*4 | |
| Engine | Model | LR6B3-23(YTO Engine) |
| Rated power(kw) | 81 | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 4794*2048*2950 | |
| Tread(mm) | Front | 1610(1710,1850,1950) |
| Rear | 1620(1720,1820,1920,2571) | |
| Wheelbase | 2510 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function | |
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+8R(Shuttle Shift) | |
| Weight (kg) | 4115 | |
| Tyre | Front | 12.4-24 |
| Rear | 16.9-34 | |
| PTO(RPM) | Rear seperated, 760/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility.
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc
Service
Pre-sales service
1, 24 hours online .Your inquiry will be quick reply by email .
2,Professionally and patiently introduction,details pictures and working video to show machine .
3,Visting our factory.
Service on sales
1,Test every machine and inspect the machine seriously .
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.
After-sales service
1, 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
2 Training how to install the machine, training how to use, maintain and repair the machine.
FAQ
1. What is the voltage/phase for this machine ?
220V 50Hz/single phase ,380V 50Hz/three phase .We also could produce according to customer’s requirement.
2. What is your terms of payment?
T/T 30% as deposit, and &70% before delivery. We will show you the photos of the products and packages before you pay the balance.
3. What your terms of delivery?
EXW,FOB,CFR,CIF,DAF.
4. How about your delivery time?
Generally, it will take about 13 days after receipt of deposit payment. The specific delivery time depends on the items and the quantity of your order.
5. What’s your MOQ?
1 set
6. How should I do if meet some trouble while using?
We can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-05-23
China Professional Best Selling New Condition Dq404 40HP 4X4 4WD Mini Wheel Garden Farm Tractor with Rops Made in China agri supply pto shaft
Product Description
Best selling New condition DQ404 40HP 4×4 4WD Mini wheel garden farm tractor with ROPS Made in China
Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity, low fuel consumption and high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly, reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/1000, 760/1000, 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10.Full series light,ROPS,Sunshade/Canopy,Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.
Tractor Main specificaiton and Technical parameters:
| Model | DQ404 |
| Drive type | 4×4 |
| Engine | |
| Type of engine | Xinchai 4-Cylinder water-cool diesel engine |
| Capacity of fuel tank(L) | 38L |
| Engine power at rated speed(kw) | 29.4 |
| Rated speed (r/min) | 2400 |
| Transmission | |
| Clutch | Dry, dual-stage type |
| PTO speed | 540/1000rpm or 540/760rpm |
| Gear shift | 8F+4R/8F+8R/12F+12R(Optional) |
| Hydraulic system | |
| Hydraulic output valve | 2-Way (optional) |
| Three point linkage | |
| Category of 3-point link | rear, category II |
| Lifting force(at point of 610mm)KN | 11 |
| Technical parameter | |
| Overall size(L x W x H)mm | 3513x1750x2130 |
| Wheel base(mm) | 1924 |
| The smallest clearance(mm) | 325 |
| Front tire | 8.3-20 |
| Rear tire | 12.4-28/14.9-24 (optional) |
| Optional Configurations | |
| ROPS,Canopy(Sunshade),Cabin with Fan/Heater/Air-condition, 2-Group Hydraulic output valve, Front ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, 14.9-24 big rear tire, Swing draw bar | |
DQ404 40HP 4WD Tractor show :
Advance Manufacutring Line:
Strictly Inspecting and Full Testing for ensuring high quality product:
Various Tractor Packing and Transporting service to meed different customers’ demand :
High quality Tractor have ISO,CE, PVOC COC, CO, etc certificates:
Perfect after-sale service for both Distributors and Private customers:
Please contact us if you have any demand for our Product :
Best price will be quoted for you as soon as receive your Requirement !
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC, Pvoc, Coc |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO Shaft
There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.
Transmission PTO
If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.
Economy PTO
The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.
Two-stage clutch on pto shaft
If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.
Types of independent pto shafts
Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
editor by CX 2023-05-15
China factory Most Popular Rice Paddy Field Tractor Dq704b 70HP 4WD Wheel Paddy Tire Agricultural Farm Tractor bush hog pto shaft
Product Description
Most popular Rice paddy field tractor DQ704B 70HP 4WD Wheel paddy tire Agricultural farm tractor
Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity,low fuel consumption,high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly,reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Big Chassis and Heavy-duty Rear axle for Durable Strong machine.
11. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.
Tractor Main specificaiton and Technical parameters:
| Model | DQ704B |
| Drive type | 4×4 |
| Engine | |
| Engine model | YTO, 4-Cylinder diesel engine |
| Capacity of fuel tank (L) | 78 |
| Engine power at rated speed (kw/hp) | 51.5kw/70HP |
| PTO power at rated speed (kw) | 43.8 |
| Transmission | |
| Steering type | Full Hydraulic Steering |
| Clutch | Dry,Dual-stage type |
| PTO Speed (rpm) | 540/760 |
| Gearshift | 8F+2R /16F+4R |
| Hydraulic system | |
| Hydraulic output flux (L/min) | 30 |
| Hydraulic output valve | 2-Group (optional) |
| Three point linkage | |
| Category of 3-point link | Category II |
| Lifting force (at point of 610mm)KN | 12.5 |
| Technical parameter | |
| Dimension (L x W x H)mm | 4571x1929x2568 |
| Wheel base(mm) | 2236 |
| Track base(mm) front wheel | 1450 |
| Track base(mm) rear wheel | 1530 |
| The smallest clearance(mm) | 340 |
| Front tyre | 8.3-24 |
| Rear tyre | 14.9-30 |
| Optional Configurations | |
| Common cabin with Fan; Heater cabin; AC cabin;ROPS; Canopy (Sunshade); 16F+4R creeper gearshift, Positive type Hydraulic lifter, 2-Group Hydraulic output valve; Front ballast; Rear ballast; Air brake, Swing draw bar | |
| Loading quantity | |
| 3 units/40HC container in Bare packing ; 6 units/40HC container in Bulk packing by Iron crate | |
Advance Manufacutring Line:
Strictly Inspecting and Full Testing for ensuring high quality product:
Tractor Packing and Loading container for Delivering goods :
High quality DQ704B 70HP 4WD tractor have different Optional configurations for choose:
Best price will be quoted for you as soon as receive your Requirement !
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO Shaft
There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.
Transmission PTO
If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.
Economy PTO
The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.
Two-stage clutch on pto shaft
If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.
Types of independent pto shafts
Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
editor by CX 2023-04-25
China wholesaler 110HP 4WD Farm Agri Agriculture Big Tractor double yoke pto shaft
Product Description
110HP 4WD Farm Agri Agriculture Big Tractor
Technical Parameters
| Model No. | TL1104 | |
| Type | 4*4 | |
| Engine | Model | LR6B3-23(YTO Engine) |
| Rated power(kw) | 81 | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 4794*2048*2950 | |
| Tread(mm) | Front | 1610(1710,1850,1950) |
| Rear | 1620(1720,1820,1920,2571) | |
| Wheelbase | 2510 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function | |
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+8R(Shuttle Shift) | |
| Weight (kg) | 4115 | |
| Tyre | Front | 12.4-24 |
| Rear | 16.9-34 | |
| PTO(RPM) | Rear seperated, 760/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility.
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc
Service
Pre-sales service
1, 24 hours online .Your inquiry will be quick reply by email .
2,Professionally and patiently introduction,details pictures and working video to show machine .
3,Visting our factory.
Service on sales
1,Test every machine and inspect the machine seriously .
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.
After-sales service
1, 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
2 Training how to install the machine, training how to use, maintain and repair the machine.
FAQ
1. What is the voltage/phase for this machine ?
220V 50Hz/single phase ,380V 50Hz/three phase .We also could produce according to customer’s requirement.
2. What is your terms of payment?
T/T 30% as deposit, and &70% before delivery. We will show you the photos of the products and packages before you pay the balance.
3. What your terms of delivery?
EXW,FOB,CFR,CIF,DAF.
4. How about your delivery time?
Generally, it will take about 13 days after receipt of deposit payment. The specific delivery time depends on the items and the quantity of your order.
5. What’s your MOQ?
1 set
6. How should I do if meet some trouble while using?
We can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by CX 2023-04-24
China supplier Africa Hot Sale Dq1504 150HP 4WD Big Agricultural Wheel Farm Tractor with Sunshade by Tractor Manufacturer Supply pto shaft tubing
Product Description
Africa hot sale DQ1504 150HP 4WD Big agricultural wheel farm tractor with Sunshade by tractor manufacturer supply
Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity,low fuel consumption,high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly,reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Big Chassis and Heavy-duty Rear axle for Durable Strong machine.
11. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.
Tractor Main specificaiton and Technical parameters:
| Model | DQ1504 |
| Drive type | 4×4, 4WD wheel type |
| Engine | |
| Engine brand and model | YTO brand, diesel engine Model LR6M3Z-23 |
| Type | In-line, direct injection,Water cooling, 4 stroke,6-cylinder |
| Aspiration way | Turbo |
| Engine power at rated speed | 110.3kw/150HP |
| Rated Power of PTO | 94 KW |
| Max. traction Force (KN) | 32.5 |
| Displacement(L) | 7.13 |
| Compression ratio | 18:1 |
| Rated speed (r/min) | 2300 |
| Lowest fuel consumption (g/kw.h) | ≤210 |
| Cylinder·Bore·Stroke | 6-110×125 |
| Fuel tank capacity (L) | 350 |
| Muffler Dimension (Dia.×Length) (mm) | φ600×295×140 |
| Muffler weight (kg) | 7.2 |
| Steering type | Full Hydraulic steering |
| Transmission | |
| Clutch | USA JpV brand, 13 inch dual-stage Clutch |
| PTO Speed (rpm) | 540/1000 |
| Gearshift | 16F+8R |
| Speed range (km/h) | F: 1.37-32.93 / R:2.09-30.63 |
| Driving brake | Wet, disk, hydro-static operate |
| Gearbox | 4×2×(2+1) |
| Gearbox shifting way | Joggle cover |
| Walking system | |
| Frame type | Frameless |
| Tyre size( front/rear) | 14.9-26/18.4-38 |
| Pressure( front/rear) (kPa) | 157-196/150-200 |
| Rim material | 330CL |
| Working device | |
| Lifter type | Semi-detached model |
| Max. Lifting force (KN) | 27 |
| Suspension model | Rear, three-point linkages |
| Suspension category | Category II or III |
| Adjusting control | Position control, float control |
| Hydraulic pump type | Gear pump CBN-E325L |
| Hydraulic output valve | 3 Groups |
| P.T.O. type | 1 type, rear |
| Spline no. of P.T.O. | 6( standard), 8, 21 |
| Diameter of spline | 35 |
| RPM | 540/1000 or 760/1000 |
| Technical parameter | |
| Overall Dimension (LxWxH) (mm) | 5240×2345×2995 |
| Wheel base (mm) | 2530/2657 |
| Track base-Front /R(mm) | 1650-2285 (1950 ex-work) /1620-2420 (1850 ex-work) |
| Track base adjusting way | Limited/unlimited |
| Minimum ground clearance (mm) | 520 |
| Min. operational weight (kg) | 4755 |
| Front /Rear axle weight (kg) | 2050/2705 |
| Front Ballast | 440kg (11 pcs, 40kg/pcs) |
| Rear Ballast | 520kg (2 lays each side) |
| Covering | Air-conditioning Cabin or Sunshade (Canopy) |
| Structure weight (kg) | 5400(without cabin)/5780 (with cabin) |
DQ1504 150HP 4WD Heavy duty big tractor showing:
DQ1504 150HP 4WD Tractor have Canpy(Sunshade) type and AC cabin type for choose:
Top-rank technical team and Advance R&D Center :
Advance Production workshop :
Strictly inspect for every set machine before Goods Delivery :
Company Honors and Certificates:
Personalized Packing and Transporting Service to meet different customers’ demand :
Perfect after-sale service for both Distributors and Private customers:
Please contact us if you have any demand for our Product :
Best price will be quoted for you as soon as receive your Requirement !
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC, Pvoc, Coc |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO Shaft
There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.
Transmission PTO
If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.
Economy PTO
The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.
Two-stage clutch on pto shaft
If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.
Types of independent pto shafts
Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
editor by CX 2023-04-22
China best 70HP 4WD Farm Tractor with Front End Loader and Backhoe pto shaft cover parts
Merchandise Description
70HP 4 wheel drive Farm Tractor with Entrance Conclude Loader and Backhoe
Technical Parameter
| Model No. | TL704 | |
| Type | four*four | |
| Engine | Model | 4108 |
| Rated power(kw) | 51.five | |
| RPM | 2200 | |
| Overall dimension (L*W*H) | 4120*1955*2725 | |
| Tread(mm) | Front | 1450 |
| Rear | 1530 | |
| Wheelbase | 2270 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function |
|
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+4R | |
| Weight (kg) | 2900 | |
| Tyre | Entrance | eight.3-24 |
| Rear | 14.9-thirty | |
| PTO(RPM) | Rear seperated, 540/760 rpm | |
| PTO Shaft Spline (mm) | 6D-38×32×6 | |
| Others | Crawl Shift, Air brake, 2-way hydraulic valve, forcing lift, front ballast weight, and 3 layer rear ballast weight, Canopy. |
|
| Conveyance | CBU 3 units in a 40’HC | |
Tractor Functions
one.Gas consumption get to upto 1 liter/hour diesel.
2. Differential lock avoid rear wheels skidding when climbing, functioning in paddy land and rainy weather.
three.Equip with double pace of PTO shaft 540/760 rpm. Tailored to diverse discipline type.
four.Adopt total hydraulic steering, unbiased gasoline tank, simple operating and higher mobility.
5.Adjustable entrance and rear tracks meet up with agricultural demands of different places. Extra-huge h2o tank and substantial capability upkeep-free of charge battery make the machine with ideal heat-dispersion and starting functionality.
six.Can adopt to numerous implements,these kinds of as plough,disc plough,ratory tiller,disc harrow,and so forth.
Organization Profile
TANGLAND Intercontinental Organization, is a wholly-owned subsidiary of CZPT Team, is the expert business for Buying and selling & International Trade and cooperation. We established up branches in ZheJiang , ZheJiang and HangZhou, as properly as overseas assembling plant, or/and demonstrating room and service centre, in Pakistan, UAE, and some Asian & African nations around the world. CZPT Team is a complete organization including manufacturing, assembling, Casting & Foundry, producing Casting components, Electric Motor vehicle, Tractor, Light truck, Semi-trailer, Metal ball and Nylon 6 items, Running an Industrial products’Information & Exchange Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Trade system named-TANGLANDINFORMATION & Technology Organization. CZPT Intercontinental.
We are largely dealing with the importing and exporting, for Machineries, Autos, Equipments, Building Components, Steel &Iron, Casting Foundry and relevant areas & parts, regular Chemical, Nylon 6 goods, Health care provides and consumables, and so on., there are our very own 2000 sellers, abroad storages, abroad companies, our turnover is US dollar 150 Million, with our professional buying and selling staff efforts, and the vision to Create the Value for all the buyers and sellers.
We export 8000 sets Agricultural devices, 5000 units various light and Medium/weighty obligation vehicles, Semi-trailers, thirty,000 sets Diesel engine and Generator sets, 15,000 tons a variety of Casting parts, this sort of as Pipe and fittings, Housing, and many others., Metal/Iron Balls, 10,000 tons Nylon 6 Wire fabric and Yarn in the year 2016, we gather a lot of advantages for Agricultural devices, Transporting Cars, Electrical power equipments, Casting Areas and Industrial materials, and enjoy the excellent advertising shares in One Belt & One particular Highway international locations, accumulate the exporting, advertising and marketing and solutions ordeals, identified up the Sales+Service business mode, cooperate with sellers, brokers, solve the challenges in devices exporting business, e.g., services, spare parts supplying, technological supporting, warranty, etc., and start the assembling and localization in some marketplaces, which strengthen the accept and reliability from clientele and users.
TANGLND Religion: To generate the value for all the customers is the only cause for CZPT existence.
Workshop
Package
Our Service
Pre-Sales Support
1. Inquiry and consulting support.
two. Sample screening help.
3.View our Manufacturing unit.
Soon after-Product sales Services
1.Training how to put in the equipment, coaching how to use,keep and mend the device.
two.Engineers obtainable to service machinery abroad.
FAQ
Q1.What is your terms of payment?
A:T/T forty% as deposit,and 60% prior to loading.we will show you the pictures of the goods and packages just before you pay the equilibrium.
Q2.What your phrases of shipping and delivery?
A:EXW,FOB,CFR,CIF,DAF.
Q3.How about your shipping time?
A:Normally,it will get about 20 times right after receipt of deposit payment.The specific shipping and delivery time is dependent on the items and the amount of your get.
Q4.Are you interested in dealership with regional business?
A:Of course,we are fairly interested in this enterprise.we’d like to cooperate with some neighborhood partner to promote a lot more tractors in local marketplace and provide far better services.
Q5.Do you test all your tractors prior to delivery?
A:Of course,we have one hundred% tractor examination and total good quality handle program prior to shipping.
Q6.How do you make our business extended-time period and very good relationship?
A:1.We keep excellent top quality,aggressive cost and successful provider to ensure our clients gain
2.We defend the gain of vendor or agent,in specifical period of time and location.
| After-sales Service: | Yes |
|---|---|
| Warranty: | Half Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO Shaft For Your Tractor
There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
IID shaft
When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.
Reverse PTO
Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Square rigid shaft
When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Economy PTO
There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
editor by CX 2023-04-13
China CE Approved Chinese Brand 50 55 HP 4WD Mini Farm Tractor with Cabin pto shaft cover removal
Product Description
| 40HP, 45HP, 50HP, 55HP, 60HP Tractor Technical Data | ||||||||||
| Tractor Model | SWT400E | SWT404E | SWT450E | SWT454E | SWT500E | SWT504E | SWT550E | SWT554E | SWT600E | WM604E |
| Tractor Power | 40HP | 40HP | 45HP | 45HP | 50HP | 50HP | 55HP | 55HP | 60HP | 60HP |
| Drive variety | 4*two | four*four | four*two | four*4 | four*2 | four*four | four*2 | 4*4 | 4*2 | four*four |
| Tractor | ||||||||||
| Duration (mm) | 3340 | 3312 | 3340 | 3312 | 3340 | 3312 | 3340 | 3312 | 3340 | 3312 |
| Width (mm) | 1500 | 1524 | 1500 | 1524 | 1500 | 1524 | 1500 | 1524 | 1500 | 1524 |
| Height (mm) | 2051 | 2255 | 2051 | 2255 | 2051 | 2255 | 2051 | 2255 | 2051 | 2255 |
| Wheelbase (mm) | 1776 | 1776 | 1776 | 1776 | 1776 | 1776 | 1776 | 1776 | 1776 | 1776 |
| Keep track of(entrance/rear) | 2WD: 1100-1300/960-1460 4 wheel drive: 1243/960~1460 | |||||||||
| Observe(entrance/rear) regulating technique | Mounted/Stepless | |||||||||
| Min.Ground clearance(mm) | 338 | 290 | 400 | 290 | four hundred | 290 | four hundred | 290 | four hundred | 290 |
| Min.operating excess weight (with taxi) (kg) | 1560 | 1630 | 1560 | 1630 | 1560 | 1630 | 1560 | 1630 | 1560 | 1630 |
| Min.functioning weight (no cab)(kg) | 1480 | 1550 | 1480 | 1550 | 1480 | 1550 | 1480 | 1550 | 1480 | 1550 |
| Counterweight (max)(entrance/rear) | fifty four/one hundred eighty | |||||||||
| Gears(forward/reverse/creeper) | eight+2/8+8 | |||||||||
| Theoretical speed (forward/reverse) | 1.seventy two-26.02/2.25-ten.391.seventy two-26.02/1.sixty one-24.24 | |||||||||
| Diesel Motor | ||||||||||
| Manufacturer | Laidong or CZPT or Quanchai | |||||||||
| Motor variety | In-line, four-stroke | |||||||||
| Intake mode | Natural consumption | |||||||||
| Cylinder variety | 4 | 4 | 4 | 4 | four | 4 | four | 4 | 4 | four |
| Rated energy kW@rpm | 29.four | 29.4 | 33.1 | 33.one | 36.8 | 36.eight | 40.five | 40.five | 44.1 | 44.one |
| Rated velocity | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 |
| Kind of air cleaner | Dry or damp sort | |||||||||
| Type of cooling system | Compelled water-cooled | |||||||||
| Steering Brake Method | ||||||||||
| Steering brake method | Hydraulic/mechanical | |||||||||
| Type of steering equipment | Cam and roller steering equipment/cycloid orbitrol steering equipment | |||||||||
| Variety of braking technique | Shoe type | |||||||||
| Transmission Method | ||||||||||
| Clutch kind | One-action/double action | |||||||||
| Gearbox sort | Two-axis mechanical gearbox | |||||||||
| Gearbox shift mode | Shift sleeve +sliding equipment | |||||||||
| Variety of central transmission | Spiral bevel equipment type | |||||||||
| Final transmission (entrance/rear) | Built-in kind, solitary-phase spur gear | |||||||||
| Strolling Program | ||||||||||
| Frame sort | Frameless | |||||||||
| Operating System | ||||||||||
| Hydraulic suspension method type | Open up-center, separated kind | |||||||||
| Kind of linkage | A few stage rear linkage | |||||||||
| Linkage classes | Class or class I | |||||||||
| Elevate capacity (610mm stage) kN | five.eight | five.8 | 6 | six | six.2 | 6.two | six.7 | six.7 | six.eight | six.eight |
| Regulating mode | Positioning management and floating manage | |||||||||
| Variety of PTO shaft | Non-impartial sort | |||||||||
| The variety of PTO shaft splines | six splines/8splines | |||||||||
| PTO shaft spline outer diameter | φ35/φ38 | |||||||||
| PTO shaft speed | 540/760 or 540/a thousand | |||||||||
| Hydraulic Program | ||||||||||
| Hydraulic output movement (L/min) | 23 | |||||||||
Offer AOYE series tractor from 36 to 55HP matched with entrance loader and again hoe
Electrical power assortment: 36, 40, forty two, forty five, forty six, 48, fifty, and 55HP
2WD and Four wheel drive
Cabin with fan, cabin with hotter, rops, and cover are available
Thorough offering direct description:
With entrance loader and back hoe, the AOYE 454/554 collection tractor can do numerous sorts of work engineering with characteristics as pursuing:
With the fluid driving on complete composition, it has qualities as compact structure and agile procedure, which qualified prospects it perform freely in incommodious field where big equipment can not obtain
The operating implements are related with tractor in quick linkage type, and the hydraulic pipes are linked by quick coupling, which are easy for assembly
The tractor hydraulic technique affords power to front loader, again hoe, and tractor raise equipments
Hydraulic oil tank is created in accordance to the intercontinental common, which is simple for upkeep
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor |
| Certification: | ISO, CE, CCC |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro II |
| Fuel: | Gas / Diesel |
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO for Your Machine
There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.
LPTO
LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.
Reverse PTO
There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.
Splined PTO
The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.
Independent PTO
Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.
LPTO shaft guard
An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.
Safety of handling a pto shaft
Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.
editor by CX 2023-04-12
China Mongolia Hot Sale Dq954 95HP 4WD Agricultural Wheel Farm Tractor with Sunshade Made in China manufacturer
Item Description
Mongolia scorching sale DQ954 95HP 4 wheel drive Agricultural wheel farm tractor with Sunshade Made in China
Tractor Principal Attributes and Positive aspects:
one.Geared up well-known manufacturer engine displaying innovative capacity,minimal gasoline use,large financial efficiency.
2. Streamlined visual appeal style, gorgeous and generous.
three.Transmission Case adopt meshed change and add the gearbox interlock system can make the procedure a lot more efficiently,dependable and simpler.
four. Double action clutch with disc spring, complete steadily and effortless to operate.
five. Completely hydraulic steering technique greatly lowered driver’s work strength.
six. Damp disc brake system, trustworthy brake overall performance.
7. Different injection of hydraulic oil, dependable to function.
eight. The lifter with drive and situation adjustment, with reputable carry.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high doing work performance.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural gear of all above the world.
10. Huge Chassis and Hefty-duty Rear axle for Durable Powerful machine.
eleven. Complete sequence light-weight, ROPS,Sunshade/Cover, Enthusiast/Heater/Air-conditioned cabin are all accessible, for far more relaxed driving environment.
Tractor Major specificaiton and Complex parameters:
| Model | DQ900 | DQ904 | DQ950 | DQ954 |
| Generate type | 4×2 | 4×4 | 4×2 | 4×4 |
| Motor | ||||
| Motor type | YTO or CZPT brand, 4 or 6 cylinder diesel motor | |||
| Capacity of fuel tank(L) | 150 | a hundred and fifty | one hundred fifty | one hundred fifty |
| Rated speed (r/min) | 2300 | |||
| Engine energy at rated pace(kw/hp) | 66.2kw/90HP | 69.8kw/95HP | ||
| Transmission | ||||
| Clutch | Dry, dual-phase sort | |||
| PTO Velocity (rpm) | 540/1000 or 760/one thousand | |||
| Gearshift | 8F+4R/16F+8R(optional)/8F+8R(optional) | |||
| Hydraulic system | ||||
| Hydraulic output valve | 2-Group (optional) | |||
| 3 point linkage | ||||
| Class of 3-stage hyperlink | Category II | |||
| Lifting force (at point of 610mm)KN | >15 | >16 | >15 | >16 |
| Technological parameter | ||||
| Dimension (LxWxH) (mm) | 4593x2050x2810 | |||
| Wheel base(mm) | 2362 | 2195 | 2362 | 2195 |
| Monitor foundation(mm) front wheel | 1485 | 1610 | 1485 | 1610 |
| Observe foundation(mm) rear wheel | 1620 | |||
| The smallest clearance(mm) | 476 | 379 | 476 | 379 |
| Front tyre | six.5-20 | eleven.2-24 | 6.5-20 | 11.2-24 |
| Rear tyre | 16.9-34(frequent)/18.4-30(optional) | |||
| Optional Configurations | ||||
| Common cabin with Admirer Heater cabin AC cabin ROPS Canopy (Sunshade) 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve Entrance ballast, Rear ballast Paddy tire, eighteen.4-30 massive rear tire, 6 cylinder diesel motor, Heavy-obligation rear, Air brake, Swing attract bar | ||||
| Loading Quantity/40HC | 3 Sets in Nude packing for CBU delivery | |||
DQ954 95HP 4 wheel drive Tractor displaying :
DQ954 95HP 4 wheel drive Tractor have diverse Optional configurations for select:
Progress Manufacutring Line:
Strictly Inspecting and Complete Testing for making sure high good quality product:
Tractor Packing, Loading container and Delivering merchandise to Customers :
Please speak to us if you have any demand from customers for our product :
Very best price tag will be quoted for you as before long as get your Requirement !
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC, Pvoc, Coc |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
###
| Customization: |
|---|
###
| Model | DQ900 | DQ904 | DQ950 | DQ954 |
| Drive type | 4×2 | 4×4 | 4×2 | 4×4 |
| Engine | ||||
| Engine type | YTO or Yuchai brand, 4 or 6 cylinder diesel engine | |||
| Capacity of fuel tank(L) | 150 | 150 | 150 | 150 |
| Rated speed (r/min) | 2300 | |||
| Engine power at rated speed(kw/hp) | 66.2kw/90HP | 69.8kw/95HP | ||
| Transmission | ||||
| Clutch | Dry, dual-stage type | |||
| PTO Speed (rpm) | 540/1000 or 760/1000 | |||
| Gearshift | 8F+4R/16F+8R(optional)/8F+8R(optional) | |||
| Hydraulic system | ||||
| Hydraulic output valve | 2-Group (optional) | |||
| Three point linkage | ||||
| Category of 3-point link | Category II | |||
| Lifting force (at point of 610mm)KN | >15 | >16 | >15 | >16 |
| Technical parameter | ||||
| Dimension (LxWxH) (mm) | 4593x2050x2810 | |||
| Wheel base(mm) | 2362 | 2195 | 2362 | 2195 |
| Track base(mm) front wheel | 1485 | 1610 | 1485 | 1610 |
| Track base(mm) rear wheel | 1620 | |||
| The smallest clearance(mm) | 476 | 379 | 476 | 379 |
| Front tyre | 6.5-20 | 11.2-24 | 6.5-20 | 11.2-24 |
| Rear tyre | 16.9-34(common)/18.4-30(optional) | |||
| Optional Configurations | ||||
| Common cabin with Fan; Heater cabin; AC cabin; ROPS; Canopy (Sunshade); 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve; Front ballast, Rear ballast; Paddy tire, 18.4-30 big rear tire, 6 cylinder diesel engine, Heavy-duty rear, Air brake, Swing draw bar | ||||
| Loading Quantity/40HC | 3 Sets in Nude packing for CBU shipping | |||
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC, Pvoc, Coc |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
###
| Customization: |
|---|
###
| Model | DQ900 | DQ904 | DQ950 | DQ954 |
| Drive type | 4×2 | 4×4 | 4×2 | 4×4 |
| Engine | ||||
| Engine type | YTO or Yuchai brand, 4 or 6 cylinder diesel engine | |||
| Capacity of fuel tank(L) | 150 | 150 | 150 | 150 |
| Rated speed (r/min) | 2300 | |||
| Engine power at rated speed(kw/hp) | 66.2kw/90HP | 69.8kw/95HP | ||
| Transmission | ||||
| Clutch | Dry, dual-stage type | |||
| PTO Speed (rpm) | 540/1000 or 760/1000 | |||
| Gearshift | 8F+4R/16F+8R(optional)/8F+8R(optional) | |||
| Hydraulic system | ||||
| Hydraulic output valve | 2-Group (optional) | |||
| Three point linkage | ||||
| Category of 3-point link | Category II | |||
| Lifting force (at point of 610mm)KN | >15 | >16 | >15 | >16 |
| Technical parameter | ||||
| Dimension (LxWxH) (mm) | 4593x2050x2810 | |||
| Wheel base(mm) | 2362 | 2195 | 2362 | 2195 |
| Track base(mm) front wheel | 1485 | 1610 | 1485 | 1610 |
| Track base(mm) rear wheel | 1620 | |||
| The smallest clearance(mm) | 476 | 379 | 476 | 379 |
| Front tyre | 6.5-20 | 11.2-24 | 6.5-20 | 11.2-24 |
| Rear tyre | 16.9-34(common)/18.4-30(optional) | |||
| Optional Configurations | ||||
| Common cabin with Fan; Heater cabin; AC cabin; ROPS; Canopy (Sunshade); 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve; Front ballast, Rear ballast; Paddy tire, 18.4-30 big rear tire, 6 cylinder diesel engine, Heavy-duty rear, Air brake, Swing draw bar | ||||
| Loading Quantity/40HC | 3 Sets in Nude packing for CBU shipping | |||
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-03-31
China Large Horsepower 4WD 150HP Farm Wheel Tractor pto shaft came apart
Merchandise Description
Big Horsepower 4 wheel drive 150HP Farm Agircultural Wheel Tractor
1.YTO/Yuchai Engine
2.Push Wheel:Four wheel drive(4*4)
three.4-stroke engines with higher torque reserve.
four.Adjustable front and rear tracks.
five.Entire hydraulic steering.
Technological Parameters
| Model No. | TL1504 | |
| Variety | 4*4 | |
| Motor | Model | LR6M3Z-23(YTO Engine) |
| Rated electricity(kw) | a hundred and ten.3 | |
| RPM | 2300 | |
| General dimension (L*W*H) | 5286*2320*2965/3145 | |
| Tread(mm) | Front | 1760(1650,1778,1862,1888,1972,1990,2100) |
| Rear | 1750~1860(1650~1760,1854~1964,1954~2064,2054~2164,2158~2268,2258~2368) | |
| Wheelbase | 2834 | |
| Clutch Sort | One blade,dry,solitary purpose, pet-engagement, Air support hydrostatic pedal driven | |
| Equipment Box | Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear change, facet operation. |
|
| Gear change | 32F+24R(Shuttle gift) | |
| Fat (kg) | 6200 | |
| Tyre | Front | 14.9-28 |
| Rear | 18.4-38 | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Features
1.Fuel intake reach upto 1 liter/hour diesel.
two. Differential lock avert rear wheels skidding when climbing, working in paddy land and rainy temperature.
three.Equip with double pace of PTO shaft 540/760 rpm. Adapted to diverse discipline sort.
4.Adopt entire hydraulic steering, unbiased gas tank, straightforward working and large mobility.
five.Adjustable entrance and rear tracks fulfill agricultural needs of diverse places. Added-big h2o tank and higher capacity routine maintenance-free of charge battery make the machine with greatest heat-dispersion and commencing efficiency.
6.Can undertake to numerous implements,this kind of as plough,disc plough,ratory tiller,disc harrow,etc
Support
Pre-income provider
one, 24 hrs online .Your inquiry will be fast reply by email .
2,Skillfully and patiently introduction,details pictures and doing work online video to show equipment .
3,Visting our factory.
Support on sales
1,Test every single device and inspect the device severely .
2,Send out the device image which you get , then packing it with normal export bundle following you affirm the equipment is okay .
3,Shipping and delivery:If ship by sea .following delivery to seaport .Will explain to you the delivery time and arrival time . Finally, ship all unique documents to you by Categorical. We will inform you the tracking quantity after we post the files.
Right after-sales service
1, 24 hours online to solve any difficulty . Supply you English guide book and specialized assist , maintain and set up movie to help you remedy the dilemma, or dispatch employee to your manufacturing facility.
two Coaching how to install the device, instruction how to use, preserve and restore the device.
FAQ
one. What is the voltage/phase for this equipment ?
220V 50Hz/single section ,380V 50Hz/a few stage .We also could generate in accordance to customer’s need.
two. What is your conditions of payment?
T/T 30% as deposit, and &70% just before shipping. We will present you the pictures of the items and packages before you shell out the equilibrium.
three. What your phrases of shipping and delivery?
EXW,FOB,CFR,CIF,DAF.
4. How about your shipping time?
Generally, it will just take about thirteen times soon after receipt of deposit payment. The certain shipping time relies upon on the objects and the amount of your order.
five. What is your MOQ?
one established
six. How ought to I do if meet some difficulty even though using?
We can provide English guide ebook and also take a video for exhibiting how to solve the problems or dispatch our employee to your manufacturing unit.
|
US $23,900-32,900 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
###
| Customization: |
Available
|
|---|
###
| Model No. | TL1504 | |
| Type | 4*4 | |
| Engine | Model | LR6M3Z-23(YTO Engine) |
| Rated power(kw) | 110.3 | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 5286*2320*2965/3145 | |
| Tread(mm) | Front | 1760(1650,1778,1862,1888,1972,1990,2100) |
| Rear | 1750~1860(1650~1760,1854~1964,1954~2064,2054~2164,2158~2268,2258~2368) | |
| Wheelbase | 2834 | |
| Clutch Type | Single blade,dry,single function, dog-engagement, Air aid hydrostatic pedal driven | |
| Gear Box | Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear shift, side operation. |
|
| Gear shift | 32F+24R(Shuttle gift) | |
| Weight (kg) | 6200 | |
| Tyre | Front | 14.9-28 |
| Rear | 18.4-38 | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
|
US $23,900-32,900 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
###
| Customization: |
Available
|
|---|
###
| Model No. | TL1504 | |
| Type | 4*4 | |
| Engine | Model | LR6M3Z-23(YTO Engine) |
| Rated power(kw) | 110.3 | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 5286*2320*2965/3145 | |
| Tread(mm) | Front | 1760(1650,1778,1862,1888,1972,1990,2100) |
| Rear | 1750~1860(1650~1760,1854~1964,1954~2064,2054~2164,2158~2268,2258~2368) | |
| Wheelbase | 2834 | |
| Clutch Type | Single blade,dry,single function, dog-engagement, Air aid hydrostatic pedal driven | |
| Gear Box | Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear shift, side operation. |
|
| Gear shift | 32F+24R(Shuttle gift) | |
| Weight (kg) | 6200 | |
| Tyre | Front | 14.9-28 |
| Rear | 18.4-38 | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by czh 2023-01-08